What’s new
What changed in each release of H2Oracle.
Version 1.7.0 November 14, 2026
Added
- An app guide: on a new install (and the web app's first visit), a short tour of the main features, each with a clip of it in use: the status card and timeline, the hot tub, logging a test, adding chemicals, logging swims, predictions and household sync. Swipe through at your own pace, or Skip to the end, where you set how many gallons the pool and hot tub hold. Watch it again from Settings › App guide.
- TA, CYA, hardness and phosphates on the status card, as chips with the last test of each. They're tested now and then, so a chip is marked when it's due for another test: TA after 2 weeks or once the acid, soda ash or baking soda logged since has moved it by about 10 ppm; CYA, hardness and phosphates after a month (CYA every 2 weeks in a hot tub, or while trichlor or dichlor keeps adding it), once stabilizer has had a week to dissolve, after calcium chloride, or once a phosphate remover has had two days to work. TA and CYA ask to be tested before they ever have been, as pH doses and the chlorine levels go by them. Tap a chip for when it was tested, why it's due, what it does and its ideal range.
- Clarity on the status card has a word under it like pH and free chlorine: ideal, fair or poor.
- Upkeep: log water changes and filter rinses, deep cleans and replacements (+ › Log Upkeep), and the status card shows when each is next due, as chips. Tap one for when it was last done and when it's due, then Done today, or Done another day to pick the date. A hot tub's water change goes by use: water lasts for about gallons ÷ 3 bathers, counted from the sessions you log, so a 400 gal tub is due after 133 (a partial water change gives back its share). It's also due after 6 months however little it's used. The filter's are due every 2 weeks (rinse), 3 months (deep clean) and a year (replace) in a hot tub, and every 3 months (clean) and 3 years (replace) in a pool; change them, or turn any off, in Settings. A notification comes the morning each one comes due (turn them off in Reminders). The timeline has an Upkeep filter, and the app guide a page on it.
- After a water change, the app no longer goes by the tests from before it: safe to swim waits for a new test, TA, CYA, hardness and phosphates are marked due for one, and predictions leave out the days around it. Replacing part of the water lowers the CYA carried forward from the last test by that share.
- Salt water, for a pool or hot tub with a salt chlorine generator: turn on Salt water in Settings and enter the range from the generator's manual (2,700–3,400 ppm for a pool and 1,500–2,000 for a hot tub to start with). Readings then ask for salt, and when it's low the reading form says how much pool salt brings it into range (in 40 lb bags for a pool), or when it's high, how much water to replace. Salt has a chip on the status card, due for a test monthly, a day after salt is added and after a water change, and Add Chemical shows what pool salt will do to it.
- Bromine: choose Chlorine or Bromine for each water body in Settings. With bromine, readings ask for bromine (Taylor drops count 2.25 times as much, with no combined chlorine step) and judge it by the CDC's levels: 4–6 ppm in a hot tub, 3–5 in a pool, whatever the CYA, which the reading form and status card no longer ask for. Low bromine gets a chlorine dose, which turns the bromide in the water back into bromine (each ppm makes 2.25 ppm), and there's no SLAM. Safe to soak needs the CDC's minimum (4 ppm in a hot tub, 3 in a pool) and isn't above 8 ppm. Predictions, the timeline, charts and Reports follow along, and the water change chip says how much sodium bromide to add after a water change to build the bromide back up. Readings taken before switching keep what they were.
Changed
- Household sync: once a phone with this version syncs, the household's phones on older versions show "Update H2Oracle" and pause syncing until they're updated, as they can't show upkeep or keep the new water setup.
- About's privacy note now covers Household sync: data stays on the phone unless it's on, and with it on, the history, water setup, treatment plans and dismissed predictions (and each phone's name) are kept on H2Oracle's sync server, which also logs when each phone connects and from where. Turning sync off on the main phone deletes the household from the server.
- Safe to swim is now part of the status card instead of a card of its own: an icon beside the pool's name (green, amber or red, with the card's top shaded to match) and the answer under it. Tap the answer for why, or tap pH, free chlorine or clarity to see how that value was worked out and the range it's judged against, at the bottom of the card. One explanation shows at a time; tap it again to close it. pH and free chlorine on the card show "=" while the last test still holds, and "≈" with what they're estimated to be now once it doesn't, the same values the answer and the predictions go by. A test holds while nothing's been added since, it's under a day old, and the water is estimated to have changed by less than a test would show (about 2½ hours for chlorine and 16 for pH at typical rates). The water temperature is no longer on the card (it's still in the reading).
- Free chlorine above 10 ppm is "OK to swim, with care" instead of "Safe to swim". Trouble Free Pool counts it safe up to the shock level, but public pools close above 10 ppm (CDC Model Aquatic Health Code), and it can irritate skin.
- Estimates say "estimated" instead of "probably": "Chlorine is estimated to be low", "pH is estimated to be high", and "Free chlorine is estimated to be below 1.5 ppm" in the safe to swim explanation.
- When the estimate is fairly sure, the answer says "Should be safe to swim" instead of "Probably safe to swim", and "Best not to swim" instead of "Probably not safe to swim" (soak, for the hot tub), still with how likely it is.
Fixed
- The pH prediction no longer appears for a pH it shows as 7.6 or 7.7, where it said "pH is drifting up" with a reading that's fine. It now suggests acid once pH is estimated at 7.8 or higher, and soda ash at 7.3 or lower, judged by the value the card shows.
- Bromine tablets are no longer taken for trichlor, which marked CYA as rising and due for a test. Sodium bromide is no longer counted as chlorine of an unknown amount, which kept predictions and safe to swim from estimating.
- The status card's button for a TA test says "Test TA" instead of "Test ta".
- A partial drain is no longer one percent more than it needs to be when the numbers come out even (4,000 to 3,400 ppm salt is 15%, not 16%).